Preformed dead end guy grips
Detailed Description
Product Name: Middle-span tension sets
Model: ANZ
The middle-span tension sets can protect and provide cushioning to the ADSS cables. The special design of helical rods makes ensure that preformed dead-ends can not cause undue stress to the ADSS cables, so that the normal lifetime of cable system is ensured.
RTS (Rated Tensile Strength): 10KN~ 30KN
Span length: 100m ~ 300m
Structure and Raw Material:
(1) Clevis Thimble: Hot galvanized cast steel. Clevis Thimble is plugged in bend of Outer Reinforcing Rods for protection and connected.
(2) Inner reinforcing Rods: Inner reinforcing rods are made of aluminium clad steel rods. With a layer of particle emery inside, Inner Protection Rods can increase friction and decrease side pressure to cables. Rods are made into four subsets which can reduce misalignment errors and speeds installation. The ends are bent outward to avoid stress to OPGW cables.
(3) Outer dead-end Rods: Rods are made into one subset with a layer of firm emery inside, in order to increase gripping power of Outer Reinforcing Rods while decreasing side pressure. Sets are color marked to reduce misalignment errors and to speed installation
Application Guide:
1. The preformed dead-ends are designed to connect Continue pole(or tower) and Terminal pole(tower), tensile pole(tower). The special specification: One unit per Terminal pole(tower), two units per tensile pole(tower) and two units per Continue pole(tower).
2. Select the Specification Model corresponding to the cable diameter range, Rated Tensile Strength.
